宿遷育苗棚使用移動苗床熱鍍鋅育苗床優點多多
移動苗床很好解決了育苗時，秧苗對于溫光氣濕肥的需求，盡可能的做到了每棵秧苗生長需求供應。育苗穴盤不直接放到地上有以下好處:1.切斷土傳病害的傳染途徑，減少苗期病害；2.苗期相對來說空氣濕度要求比較高，不直接放到地上，避免了漚根現象的發生；3.不用人為翻盤，避免根系扎到土里，移栽時損傷根系造成緩苗慢的現象。
移動苗床-熱鍍鋅移動苗床的結構:支架, 滾動體, 工作臺
1.苗床支架材料采用采用鍍鋅鋼管, 耐腐蝕, 苗床網采用熱鍍鋅鋼絲網
2.苗床的工作臺高度上可進行微調
3.工作臺在中間位置時可分別向左右移動300mm
4.邊框采用鋁合金, 重量輕, 耐腐蝕
5.移動苗床采用具有防翻限位裝置
6.移動苗床可提高溫室內土地利用
The moving seedbed well solves the demand of seedlings for warm phosgene wet fertilizer during seedling raising, and achieves the growth demand supply of each seedling as much as possible. The advantages of not directly placing the seedling plug on the ground are as follows: 1. Cut off the transmission route of soil-borne diseases and reduce seedling diseases; 2. The air humidity requirement is relatively high at seedling stage and is not directly put on the ground, thus avoiding the occurrence of retting root. 3. There is no need to turn over the plate artificially to avoid the phenomenon that the root system is stuck in the soil and the root system is damaged during transplanting and the seedlings are slow.
Moving Seedbed-Hot Galvanized Moving Seedbed Structure: Support, Rolling Body, Worktable
1. The seedbed support material adopts galvanized steel pipe, which is corrosion resistant, and the seedbed net adopts hot galvanized steel wire net.
2. The height of the worktable of the seedbed can be fine-tuned
3. When the worktable is in the middle position, it can move 300mm left and right respectively.
4. The frame is made of aluminum alloy, which is light in weight and corrosion resistant.
5. That move seedbed adopt a position limiting device with anti-overturning
6. Moving the seedbed can improve the land use in the greenhouse.

查看全部介紹