| 供應商 | 北京汐源科技有限公司 店鋪 |
|---|---|
| 認證 | |
| 報價 | 面議 |
| 關鍵詞 | 漢高ABLESTIKJM7000導電膠 |
| 所在地 | 北京建國路15號院 |
9年
LOCTITE ABLESTIK JM 7000 die attach adhesive has been
formulated for use in high throughput die attach applications. This
material has been used successfully on rigid substrates with die sizes
up to 700 mils.
LOCTITE ABLESTIK JM 7000 has been approved by DESC and
Rome Laboratory for military products.
TYPICAL PROPERTIES OF UNCURED MATERIAL
Viscosity, HAAKE RV-20 Rotoviscometer, mPa·s (cP):
Cone 1o @ Shear rate 22 s
-1 9,000
Work Life @ 25°C, hours 8 to 16
Shelf Life @ -40°C (from date of manufacture), days 365
TYPICAL CURING PERFORMANCE
Cure Schedule
30 minutes @ 150°C
Suggested temperature cures are from 150 to 350oC. For
applications requiring higher electrical conductivity, a cure cycle of 15
minutes @ 300oC is recommended. Product properties will not be
reduced by subsequent post die attach thermal exposure, i.e.,
wirebond, and/or lid seal up to 370oC.
TYPICAL PERFORMANCE OF CURED MATERIAL
Die Shear Strength:
2 X 2 mm Si die, kg-f,
cured 20 minutes @ 150oC
Substrate DSS
Ag/Cu LF ≥5
Tensile Strength :
cured 30 minutes @ 300oC, MPa
After Cure After 1000 TC'C"
>17 >17
Radius of Curvature:
Si die on Alumina, meters
cured 30 minutes @ 300oC
Chip Size: ROC
15 x 15 mm > 5
漢高樂泰導電膠,楊浦厚膜漢高ABLESTIKJM7000導電膠
面議
產品名：漢高ABLESTIKJM7000導電膠,JM7000導電膠,漢高導電膠,樂泰導電膠
ablestik84-1A導電膠
面議
產品名：導電膠,耐高溫導電膠,84-1A導電膠,84-1LMI導電膠
漢高漢高導電膠,南匯厚膜電路漢高ABLESTIKJM7000導電膠
面議
產品名：漢高ABLESTIKJM7000導電膠,JM7000導電膠,漢高導電膠,樂泰導電膠
青島樂泰SF7365清洗劑
面議
產品名：樂泰SF 7365清洗劑,表面清潔劑
衡陽樂泰US2350灌封膠雙組份灌封膠
面議
產品名：樂泰US 2350灌封膠,聚氨酯灌封膠,雙組份灌封膠
西藏樂泰222螺紋膠
面議
產品名：樂泰 222 螺紋膠,鎖固膠
荊州樂泰277螺紋膠鎖固膠
面議
產品名：樂泰 277 螺紋膠,鎖固膠
撫順樂泰545螺紋膠
面議
產品名：樂泰545螺紋膠,密封膠